The following products/part numbers can no longer be purchased, but we will always provide technical support. Also included here are technical datasheets that may be of use.
Please do not hesitate to contact us if you have any questions which cannot be answered here.
DISCONTINUED PRODUCTS
Leaf Area & Root length Systems
Helios logger
Evapo Sensor & Meter
Tensiometers – see below for part numbers
DISCONTINUED PART NUMBERS
RELATIVE HUMIDITY & AIR TEMPERATURE
• SKH 1093 – recalibration kit
• SKH 1093/M – Recalibration kit
• SKH 1093/R – Recalibration kit
• SKH 2050 – 4-20mA sensor
• SKH 2052 – 4-20mA sensor
• SKH 2052-S – 4-20mA sensor
• SKH 2052/B – 4-20mA sensor
• SKH 2052/ET – 4-20mA sensor
• SKH 2053 – 4-20mA sensor
• SKH 2053/ET – 4-20mA sensor
• SKH 2054 – 4-20mA sensor
• SKH 2055 – 4-20mA sensor
• SKH 2075 – One off
• SKRS 085C – Compact radiation screen
BAROMETER
• SKPS 800M/I – Marine sensor
PLANT MOISTURE SYSTEM
SKPM 1400/50 – 50bar PMS
• SKPM 1405/50 – 50bar PMS
SOIL TEMPERATURE PROBES
SKTS 200/100k – 100k
• SKTS 200/U/D – 10K therm.probe/4 core cable + 3m. cable
• SKTS 200/X2/R/I – 2 x Soil temp probe, v o/p + Y split to 1 dif. plug
• SKTS 200/X2/RD/I – 2 x Soil temp probe, v o/p + Y split to 1 dif. plug
• SKTS 200R – + resistor for voltage output
• SKTS 200R/I – Soil/water temp. probe (mV o/p) & DataHog conn.
• SKTS 200SS/I – S/S Temp probe for food appli.
• SKTS 200U/M/I – Microthermistor probe
• SKTS 200U/R/D/I – Unsheathed temp. Probe for diff volts input
• SKTS 200UR/I – Unsheathed temp. probe, mV o/p & DataHog con.
• SKTS 300 – PRT
• SKTS 300/4 – PRT soil temp. probe 0-1v = 0-50deg.C
• SKTS 300/5 – PRT Soil Temp 0-5V = -20 to +70°C PSU 22-30vdc
• SKTS 300/I – Soil/Water Temp Probe PT100, 3m cable and plug
• SKTS 310 – PT100 Surface temperature probe
• SKTS 350 – PT100 Soil/Water Sensor with 3m PUR cable
• SKTS 400 – High Accuracy Water Temp Sensor (+/-0.1°C)
• SKTS 400/SS2 – Above with plug
• SKTS 401 – Hi Accuracy Temp (+/-0.1°C) & 60cm insertionprobe
• SKTS 410 – Extended Range Temp (-50-150°C) with 15cm probe
• SKTS 411 – Extended Range Temp (-50-150°C) &60cm insert probe
• SKTS 451 – IP68 Soil/Water Temp with integral regulator & 3m
• SKTS 455 – IP68 Soil/Water Temp Sensor Probe -20 to +70°C
• SKTS 456 – Soil Temp with -10- +60 with integral regulator
• SKTS 600S/I – Pressure transducer only + plug
TENSIOMETERS
• All SKT 600 series all lengths inc. /I and /S
• SKT 642/I – Longer length shaft
• SKT 645/I – Longer length shaft
• SKT 648/I – Longer length shaft
• SKT 650/10/I – Mini Tensiometer & DH2 plug
• SKT 650/180 – Longer length shaft
• SKT 650/20/I – Mini Tensiometer & DH2 plug
• SKT 650/I – Longer length shaft
• SKT 670 – Needle Sensor for Septum Tensiometer
• SKT 670M – Needle Sensor for Mini Tensiometer
• All SKT 690 Series all lengths.
• SKT 695 – PVC Septum Tensiometer + screw cap + Septa
• SKT 900 – Electronic Tensiometer Transducer 26PCCFA6D
• All SKTD 690 Series all lengths
• All SKTM 650 Series all lengths
• SKTM 650S/10 – Mini Tensiometer + st.psu
• TEN/1 – ‘O’ ring kit
• TEN/2 Replacement bulb & shaft
• TEN/2M – Replacement bulb & shaft for Mini Tensiometer
• TEN/3 – Spare PVC boot
• TEN/4 – Spare dial gauge
• TEN/5 – Syringe & filling tube
• TEN/8 – Spare septum topper x5
• TEN/8D – Spare stopper for dial tensiometer x5
• TEN/8M – Spare stoppers for mini x5
• TEN/9 – Spare needles
• TEN/9A – Spare needles green x5
• TEN/9B – Spare needles black x5
• SKT 800 – HydroSense3
• SKT 810 – Needle sensor for HS3
• SUB/USB_INTERFACE_PCB
• TEN/10 – HydroSense3 Charger
• SKU 426 – Non-waterproof UVA
• SKU 426/I – Non-waterproof UVA + plug
• SKU 426/SS2 – Non-waterproof UVA + plug
• SKU426/WEISS – Weiss cable
• SKU426/X – For extensions?
SKU 426 has been replaced with SKU 427
SOFTWARE
Leaf Area
Root Length
SkyeLynx Standard (this has been superceded with SkyeLynx Comms
Skye Lynx Auto
SkyeLynx Deluxe
WizzCom